ARCHON W42VR is 16 pcs CREE LED multi-functional diving photographing light with white, red, purple and UV high-power LED. With brightness of 5200 lumens, light angle of 120°and max run-time over 5 hours, this professional video light can be used in various underwater environment.
(1).Brightness:White light:5200lumens
Red light:400lumens
Purple light:6W
UV light:6W
(2). Bulb: White CREE XM-L U2 LED *8 (max 2600 Lumens);
Red CREE XP-E N3 LED*4 (620nm)
Purple light x 2 wave length:410nm
UV x 2 length:365nm
(3).Runtime: White: 4 Hour,Red:4 Hour Violet/UV:5 Hours
Specification:
Archon W42VR Diving Light
OPERATING INSTRUCTIONS
PRODUCT SPECIFICATIONS:
1. Model: W42VR multifunction underwater photographing Light
2. Bulb: White CREE XM-L2 U2 LED *8 (max 5200 Lumens);
Red CREE XP-E N3 LED*4 wavelength 620 nm (max 400 Lumens);
Purple LED *2 wavelength 410nm (max 6W);
UV LED*2 wavelength 365nm (max 6W);
3. Switch 1: Red> Purple> UV> off
Switch 2: White high> White medium >White low> off
The two switches can be operated separately or simultaneously.
4. Runtime: White High Mode: 1.5H; White Medium Mode: 3.0H; White
Low Mode: 4.0H Red Light: 4.0H; Purple Light: 5.0H; UV light: 5.0H
5. Color temperature: 5000K (white light)
6. Reflector: No hotspot design, no reflector;
7. Lens: 4mm Polycarbonate Board;
8. Body material: Durable aircraft-grade aluminum;
9. Angle of light beam: 120°
10. Surface treatment: Premium Type III hard-anodizing.
11. Color: Black
12. Battery: 18650 rechargeable Li- ion battery *4;
13. Battery Indicator: 100%-50%: Green; 50%-30%: Yellow; 30%-10%:
Red; Below 10%: Red Flashing; Below 5%: switch off;
14. With battery over-discharging protection, polarity reversing
protection
15. with gas release valve
16. Operation voltage: 2.8V to 4.2V;
17. Waterproof: 100 meters underwater
18. Dimensions: 140.9mm (length)* 62.6mm (dia. of head);
19. Weight: 490 grams (without battery); 682.4 grams (with battery)
20. Underwater Weight: 330 grams (with battery)
21. Impact resistance: 1.5M.
BATTERY INSTALLATION
1. Remove the tail by turning counter-clockwise.
2. Remove used batteries and replace with fresh batteries as shown by
the polarity stickers.
3. Mount the tail by turning clockwise.
BATTERY CHARGING
1. Plug the charger in the wall power socket, the indicator light is green
in the free-load status.
2. Put the battery in the slot of the charger.
3. The indicator light is red if the battery is not fully charged; it will turn
green after fully charged.
4. Take out the fully charged battery and use them in the diving light.
ON/OFF
Push the button switch to turn it ON.
MODES CHANGING
1. Successive push the switch 1 ON-OFF within two seconds to cycle
through Red, Purple, UV Light, OFF;
2. Successive push the switch 2 ON-OFF within two seconds to cycle
through High, Medium, Low (white light), OFF.